Few high schools, let alone those in cities, have hens, pigs, and sheep, a one-acre vegetable garden, or an extensive network of hiking trails. But Common Ground, in New Haven, Connecticut, is far from ordinary. The mission of this 200-student charter high school, which sits at the edge of a wooded, 1,800-acre state park, “is to instill environmental literacy in urban kids,” says Melissa Spear, executive director.

Additional Information:
Jump to credits & specifications

Since 1997, when the school was founded, Common Ground has expanded several times, always by adding onto its base of operations—a barnlike, wood clapboard structure referred to as the hilltop building because of its location on the steeply sloping campus. But about eight years ago, with its student body still growing, and with more summer, after-school, and community programs run by its parent nonprofit, Common Ground’s management team and board began to consider another expansion, issuing a request for proposals in 2011.

Gray Organschi Architecture, a New Haven– based firm known for its attention to craft, decided to compete for the project because of an affinity for the school’s educational vision. “Common Ground’s values were close to home,” says principal Alan Organschi. Although several firms that specialize in K–12 construction were also in the running, the selection committee chose Gray Organschi, in large part because of its encompassing view of environmentally responsible design. “Their interest in sustainability goes beyond merely reducing operational energy,” says Spear. “They also consider the materials and where they come from.”

These ideas are manifest in the rustic, almost 15,000-square-foot, two-story building, completed last April. Behind its cedar rainscreen skin and below its irregular sawtooth roof, the new $9.3 million structure houses a small gym that also serves as an event space, classrooms for science and art, and offices. The new facility is positioned near the base of the school’s site, with its second floor connected to the upper part of campus and the hilltop building by a pedestrian bridge.

Arguably the new building’s most remarkable feature is its structure, which consists primarily of exposed black spruce, with glulam trusses and beams, and cross-laminated timber (CLT) used for bearing and shear walls and a stressed-skin roof system. CLT, which is not yet common in the U.S., is made of multiple layers of dimensional lumber to form large, slablike panels. A sturdy-looking but sleek central stair is also constructed of this material.

Although these wood components are highly engineered, they retain the evidence of their natural origins. With knots, the direction of the grain, and the individual pieces of lumber easily discernible, they lend the interior a tough, vaguely Scandinavian feel. And from an environmental standpoint, this use of mass timber, instead of steel or concrete, means that the building sequesters, rather than emits, carbon. According to Gray Organschi’s estimates, it offsets 447 metric tons of carbon dioxide, the equivalent of the annual emissions of 95 cars.

The method of construction was also environmentally sound, with the wood manufactured into CLT and glulam in northern Quebec, near where it was harvested. The glulam and CLT material was then fabricated into elements, including trusses, stair components, and insulated roof panels, in a New Hampshire factory. The approach minimized disruption to the site and meant that, once the foundations were poured, the structure could be erected and enclosed by a crew of five workers equipped only with light tools and a mobile crane in about five weeks, says Organschi.

In addition to their environmental and construction benefits, the legible structure and its timber components help support the school’s educational goals. The students study the materials, devising their own tests to explain their physical and chemical properties. Hector Roman, a junior considering a career as a mechanical engineer, explains that the CLT is stronger than steel because it is made of several layers of wood from fast-growing trees. The pedagogical approach resonates, explains Emily Schmidt, the school’s chemistry and physics teacher, because “it introduces the science to the students in a way that is relevant to them.”

The students can talk at length about other features of the project, including its system of geothermal wells, the acoustical and thermal properties of the building enclosure, and how the surrounding bioswales and wetlands clean the rainwater that runs off the standing-seam roof. But when the young occupants are asked about their favorite features, they invariably point to experiential aspects rather than environmentally beneficial or functional attributes. Hope Dymond, a high school junior, points to the quality of the light that comes in through the north-facing clerestory windows and the glimpses of the sky they afford.

Such comments point to the real triumph of the project. The building is a genuinely handsome expression of the values of the school in built form, as well as an instructional tool. But it is also a great environment for teaching and learning—and for contemplating the clouds.


Credits

Architect:

Gray Organschi Architecture
35 Crown Street
New Haven, Connecticut 06510
(phone) 203-777-7794; (fax) 203-782-0940

 

Personnel in architect's firm who should receive special credit:

Elizabeth Gray FAIA; Alan Organschi; Karen Scott, RA; Eero Puurunen

 

Architect of record:

Gray Organschi Architecture

 

Interior designer:

Gray Design

 

Engineers

Structural  Engineer - Frame:
Bensonwood
Walpole, New Hampshire 

Structural Engineer - Foundation:
Edward Stanley Engineers
Guilford, Connecticut

MEPFP:
Altieri Sebor Wieber  LLC
Norwalk, Connecticut

Civil:
Godfrey-Hoffman Associates, LLC
North Haven, Connecticut

 

Consultants

Lighting:
Atelier Ten
New Haven, Connecticut

Landscape Architect:
Mark J. Papa, L.A., LLC
North Haven, Connecticut

Cost Estimator:
Faithful Gould
Boston, Massachusetts

Solar /PV:
Westport Solar Consultants
Westport, Connecticut

Geothermal Well Designer:
Hadley & Aldrich
Boston, Massachusetts

 

General contractor:  

Construction Manager : Newfield Construction, Inc. Hartford, Connecticut

 

Photographer:

David Sundberg; ESTO Photographics  New York, New York

 

Specifications

Structural System

Manufacturer of any structural components unique to this project: Black Spruce Cross Laminated Timber Panels (CLT)
Nordic Wood (CLT) - Montreal/Quebec, Canada
Vermont Natural Coatings (CLT finish)
Bensonwood - Walpole, NH
Manufactured by Montreal-based Nordic Engineered Wood and prefabricated offsite by Bensonwood in New Hampshire.
Southern Pine Glued-laminated Timber
Bensonwood - Walpole, NH

Exterior Cladding

Metal/glass curtain wall: EFCO 5600

Siding: Inland Port Orford Cedar
Soffit: Spruce
South soffit: White Fir

Roofing

Metal: Una-Clad Acrylume Steel
Standing seam  (aluminum-zinc alloy-coated steel sheets)

Windows

Metal frame: EFCO 2700

Glazing

Glass: Oldcastle BuildingEnvelope
TGP (Fire Rated)

Insulated-panel or plastic glazing: Co-Ex Modulit 500 Multiwall Polycarbonate

Doors

Entrances: EFCO

Metal doors: Curries

Wood doors: Bensonwood

Special doors: Wilson Doors (Vertical Bi-Fold Door)

Hardware

Locksets: Sargent

Closers: Sargent

Exit devices: Sargent

Other special hardware: All Glass Entrance Hardware
C.R. Laurence Co., Inc

Interior Finishes

Cabinetwork and custom woodwork: Northeast Interior Systems (laboratories)
AGA Architectural Millwork
JIG designbuild (built-in CLT table and bench at Grand Stair)

Paints and stains: PPG Pittsburgh Paints
Benjamin Moore
Penofin
Sansin ENS Optimum
Vermont Natural Coatings (CLT)

Plastic laminate: WilsonArt "White Cypress" and "Brittany Blue"
Arborite "Denim Blue"

Solid surfacing: Corian "Stardust"

Special surfacing: Tectum (acoustic panels in classrooms)
Homasote DesignWall 440 "Quartz"  (tackable panels in classrooms)

Floor and wall tile: Crossville 4X12 "Eleventh Hour" green in Mens and Womens Rooms
Crossville 4X14 "Tea  for Two" white gloss walls in Kitchen and Shower Room
Daltile 2X2 "Keystone" black floor in Shower Room
Daltile 12X12 City View Color Urban Evening floor in Water Closet

Resilient flooring: Atmosphere Recylced Rubber Flooring (in classrooms)
Dynamic Sports Construction, Inc. Athletic Flooring (in Multi-Purpose Room)

Raised flooring: Natural Fossilized Bamboo flooring (by Cali Bamboo)

Special interior finishes unique to this project: Grind and vacuum exposed concrete with Eco Procote SoyCrete sealer (flooring)

Furnishings

Chairs: OFM, Inc. Ergonomic Management Chair
National Public Seating (Folding chairs and chair trucks)
Artco-bell (Adjustable height stools)
Virxo-SO (Stackable chairs)

Tables: Diversified Woocrafts (Rectangular science table)
Correll, Inc. (Round Activity table)

Other furniture: Custom CLT Bench, Table - JIG Design Build

Lighting

Downlights: SPI LIghting EIP 11059

Conveyance

Elevators/escalators: Kone, Inc. Ecospace Elevator

Plumbing

American Standard Moments Selectronic  Lavatory Faucet
Chicago Faucets Water Faucet, Manuel Faucet, Ball Valve Turrets (Science)
American Standard Commercial Shower Kit 1662.211
Elkay EDFPBM117C Drinking Fountain

Energy

Photovoltaic system: The building’s interior is heated and cooled by a synergistic system of solar photovoltaic panels and ground-source heat pumps served by geothermal wells underneath the school’s parking area. 

Other unique products that contribute to sustainability: Goethermal System Design -
Haley & Aldrich

Add any additional building components or special equipment that made a significant contribution to this project: Carefully articulated skylights optimize natural day-lighting that can entirely eliminate the need for artificial illumination, and strategic window placement avoids over-heating during the summer while allowing for passive solar heating during winter.

Storm-water collected from across the entire campus is filtered through a series of rain gardens, bio-remediation pools, and low-energy agricultural irrigation systems that dramatically reduce additional loading of the city’s antiquated storm sewers.

Pervious concrete paving at some exterior locations.